Porsche 911 SPORT DME
Porsche 911 SPORT DME
Fitment: 1984 to 1989 Porsche 911 3.2L Carrera
Update your failure-prone 30+ year old factory Bosch DME with this modern direct-fit replacement!
The Focus 9 Technology SPORT DME is an upgrade for the factory BOSCH ML3.1 Motronic computer. Unlike universal aftermarket computers, installation is simple and requires no additional sensors, tuning or other modifications. While it looks different internally, it functions identical to the original Bosch DME in every way right down to the FQS switch. This is because the SPORT DME reuses four key microchips from your original DME which preserve the core functionality of the original Bosch DME. In this way, all performance chips, MAF kits or other upgrades made for the factory DME are compatible. By reverse-engineering the factory Bosch DME, we updated the electronics around these chips using 21st century electronics and design practices. This, in effect, is the equivalent of removing the brains from your old tired DME and giving it a brand-new body. In doing so, we corrected fundamental issues that plagued 911 owner for decades.
Center Point Lid Mount
No more bending and braking tabs to open the DME cover when swapping performance chips. Our Center point mounting system opens the DME easily in seconds with just a Philips screwdriver.
24pin/28pin Chip Select Switch
You no longer have to choose between 24 or 28 pin compatibility. Simply insert which ever chip you like, then set the selection switch mode.
OBD Module Ready
This DME is designed to accept the F9T OBD+ Upgrade module. It has provisions built into the circuit board that support mounting and sensor connections. More information about upgrading to all On-Board Diagnostics can be found using the link below:
98% new electronics
100% Plug-N-Play
6 Year Warranty Parts & Labor
Can be upgraded with On-Board Diagnostics
Accepts "traditional" chip swaps
24/28pin EPROM Selection Switch
Superior Reliably
Designed and Manufactured in the USA
Important Notes:
Installation of new DME electronics is performed on the core you send. The core DME must be out of 1984 to 1989 911 equipped with a 3.2L engine or 1985.5 to 1991 944 equipped with an 8-Valve engine.
The following parts from your core must be reusable:
Enclosure and Main Connector
S100 Chip (Flywheel Sensor Chip)
***All of the other 300+ old parts in your core DME (except for what is listed above) can be missing or damaged.
Once an order is placed, please ship your core DME to the following address:
Focus 9 Technology, LLC
5350 W. BELL ROAD, SUITE C122 # 156
GLENDALE AZ 85308-3907
Fitment:
1984 to 1989 Porsche 911 3.2L Carrera